How to install a mobile signal amplifier
Self-performed repeater installation
Repeater installation by your local technical specialists
How to install a mobile phone signal booster in a small house
Today we speak on cellular phones in less appropriate places for mobile communication like subways and elevators. Still the power of mobile providers is not limitless. Inhabitants of rural zones and remote regions, owners and clients of shops and saloons located in basements still suffer from weak signal or its absolute absence. In such situations signal repeaters are able to help considerably.
Booster installation is a quick and easy task. However, dealing with technical devices we can always need some assistance. First helper in the process of booster installation can be the Manual for Mobile Repeater you’re welcome to download from the page of any gsm repeater model. To manage mobile phone booster installation easily you can also read the following article.
First of all, it’s necessary to know what a booster kit includes.
- 1. Cell phone repeater
- 2. Indoor omni antenna
- 3. Outdoor antenna
- 4. Outdoor coaxial cable (10m or 15m)
- 5. Power supply
Next let’s proceed with booster installation.
Installation steps
- Find an appropriate position for an outdoor antenna.
Requirements to outdoor antenna installation:
- outdoor antenna should be installed on the roof of the house or in some other place where your mobile device is within coverage zone. Mobile signal should be strong, at least three-four bars indicated on your phone display.
- outdoor antenna should be fixed in straightly
- Plug in the outdoor antenna to the mobile booster from BS side and fasten tightly.
- Plug in the indoor antenna to the mobile booster from MS side and fasten tightly.
Requirements to indoor antenna installation:
- indoor antenna should be at 5-meter distance from an outdoor antenna
- indoor antenna should be at least 2 meters above the ground
- indoor antenna should be fixed vertically with the ground.
- Connect the booster box to the Power Supply.
Some models have an inbuilt Power Supply. Please, examine the manual applied to your model, if your signal repeater kit doesn't include separate Power Supply, skip this step!
If the light indicator on the booster turns on it means the installation has been implemented correctly.
Note: Switch on the repeater only after you connect outdoor and indoor antennas in the proper way!
- Test the signal of your mobile telephone – a maximum quantity of bars should be indicated on the display of your phone in each corner of the location within booster coverage zone. In case the mobile signal is still instable try to change the position of the outdoor antenna for more proper one.
Important notes for installation:
- Cables from outdoor antenna should not be wound and be placed as straight as possible in order not to create any hindrance for signal reception and its transmission.
- Cables should be shortened to the acceptable maximum so that not to waste or decrease mobile signal coverage range.
- In order to prevent water from coming into the mobile phone booster through the cable make a loop in it.
- Keep the outdoor antenna as far as possible from frequency aerials, high voltage cables, metal nets or transformers.
How to install a mobile phone signal booster in a big building
Today we speak on cellular phones in less appropriate places for mobile communication like subways and elevators. Still the power of mobile providers is not limitless. Inhabitants of rural zones and remote regions, owners and clients of shops and saloons located in basements still suffer from weak signal or its absolute absence. In such situations mobile signal repeaters are able to help considerably.
Booster installation is a quick and easy task. However, dealing with technical devices we can always need some assistance. First helper in the process of booster installation can be the Manual for Mobile Repeater you’re welcome to download from the page of any gsm repeater model. To manage mobile phone booster installation easily you can also read the following article.
First of all, it’s necessary to know what a booster kit includes:
- Cell phone amplifier
- Indoor omni antenna
- Outdoor antenna
- Outdoor coaxial cable (10m or 15m)
- 5-meter indoor coaxial cable (optional)
- Power supply
Next let’s proceed with booster installation.
Installation steps
- Find an appropriate position for an outdoor antenna.
Requirements to outdoor antenna installation:
6li>outdoor antenna should be installed on the roof of the house or in some other place where your mobile device is within coverage zone. Mobile signal should be as strong that at least three-four bars are indicated on your phone display. - outdoor antenna should be fixed in straightly
- Plug in the outdoor antenna to the mobile booster from BS side and fasten tightly.
- Plug in the indoor antenna to the mobile booster from MS side and fasten tightly.
Requirements to indoor antenna installation:
- indoor antenna should be 5 meter distance from an outdoor antenna
- indoor antenna should be at least 2 meters above the ground
- indoor antenna should be fixed vertically with the ground.
- Connect the repeater box to the Power Supply.
Some models have an inbuilt Power Supply. Please, examine the manual applied to your model, if your signal repeater kit doesn’t include separate Power Supply, skip this step!
If the light indicator on the booster turns on it means the installation has been implemented correctly.
Note: Switch on the device only after you connect outdoor and indoor antennas in the proper way!
- Test the signal of your mobile telephone – a maximum quantity of bars should be indicated on the display of your phone in each corner of the location within booster coverage zone. In case the mobile signal is still instable try to change the position of the outdoor antenna for more proper one.
Important notes for installation:
- Cables from outdoor antenna should not be wound and be placed as straight as possible in order not to create any hindrance for signal reception and its transmission.
- Cables should be shortened to the acceptable maximum so that not to waste or decrease mobile signal coverage range.
- In order to prevent water from coming into the mobile phone booster through the cable make a loop in it.
- Keep the outdoor antenna as far as possible from frequency aerials, high voltage cables, metal nets or transformers.
How to install a mobile phone signal booster in a car
Practically half of each day we spend on the way. So, when driving a car we always need to stay in touch with family, friends or colleagues. However, mobile signal can get weaker depending on the zone, power waste of wireless transmission and shadow effects of buildings can also substitute a real obstacle for quality mobile connection. A sensible resolution to this problem can be installation of a signal repeater in your car. Such a device is able to amplify GSM signals coming from mobile station wherever you go and guarantee its improvement up to satisfactory level.
The process of booster installation is not time-consuming and also rather simple so that you don’t need technical qualification to implement installation correctly. However, to make sure you do everything right read this article or download the Manual from the page of the corresponding gsm repeater model. If you need additional help on the device installation you’re welcome to contact our Support Team Managers.
We advice to start with examination of a booster package. In order to implement installation properly it’s necessary to make out what the device kit comprises.
Now we can directly proceed with booster installation.
Installation steps
- Find a suitable position for an in-car antenna (e.g. under the seat of a driver).
- Clear and dry the place where you’re going to fix the in-car antenna. Put up the nylon strap tightly on the chosen position and stick the device firmly.
- Plug in the in-car antenna into the in-car antenna interface of the amplifier and fasten it tightly.
- Mount out-of-car antenna in the car trunk with the help of two screws.
- Plug in the out-of-car antenna into the out-of-car antenna interface of the booster and fasten the screws tightly.
- Connect the Power with cigar lighter.
If the indicator on the booster lights up the installation has been executed properly.
NOTE: Switch on the amplifier only after installing out-of-car and in-car antennas correctly!
- Test the signal of your mobile telephone. After installation mobile signal should get maximally strong within all the car area. In case the mobile connection is still instable try to change the position of the antennas for a more appropriate one.
Repeater installation by your local technical specialists
Antenne 40
520 chemin de Maisonnave
40350 Gaas
06.86.27.80.48
contact@antenne40.fr
antenne40.fr
Thierry Anglade
Electricité Générale
2 rue Jean Ferrat15260 Oradour
685700418
thierry.anglade15@orange.fr
Grégory Bambina
GBSINFO - solutions informatique
26240 BEAUSEMBLANTFrance
0612593168
gregory@gbsinfo.fr
gbsinfo.fr
Michel Turgis
TURGIS eurl électricité générale
63, hameau Carré, 50840, Fermanville, FRANCE
07 71 65 06 39
eurlturgis@yahoo.fr
www.eurlturgis.com
SARL Lynxmedia
25 Rue du Maréchal Koenig, 67210, OBERNAI, France
(+33) 03 88 19 07 87
contact@lynxmedia.fr
Philipp Solf
ANGÉLOZ & ASSOCIÉS SA
le canton de Fribourg en Suisse
41264254585
phs@angeloz.com, philipp.solf@laposte.net
Tore Adelsten Klever
Ctech Engineering AS
Selteveien 130N3512Hoenefoss
47 92 89 99 69
tore@ctnor.com
Charles
Network Signal Amplifiers
01 Crescent Road Kylami MidrandJohannesburg
27723303752 / 27110568165
PCCONNECT
159 A UTRECHT STREETVRYHEIDKWA-ZULU NATALSouth Africa3100
27 0349800254
www.pcconnect.co.za
JAGANMOHANREDDY
Lilongwe, Malawi Africa
265993415814
Washington Odhiambo, James Kadenge
Pompey Communications
254 7 3200 0004, 254 7 2274 3223
technical@pompey-systems.co.ke, sales@pompey-systems.co.ke
DPL CONSULTING
Lugar do Cavernelhe,Ent. 7G, 1º Esq.5000-281Vila Real
(+351) 259 043 757
WORLD INFORMATICA Y SERVICIOS
C. Jorge Juan, 6828009 Madrid (España)
34915763139
wis@worldwis.es
www.worldwis.es
C.C.SUR, S.L.
Badajoz, EspañaEl servicio de la instalación porSevilla-Badajoz-Cordoba-Cáceres-Huelva-Almeria
00 34 924 871 528
distribucion@ccsur.es
Leonardo Zaccaria
PugliaConnect di Zaccaria Leonardo
3890967912
info@pugliaconnect.it
www.pugliaconnect.it
CLK Italia srl
via Marie Curie 3
50051 - Castelfiorentino (FI)
+39 0571 1661103
info@clk-italia.it
www.clk-italia.it
Teddy BOA
B.T Informatique
89 Allée des Suretiers, Cité-Chaulet,
97123 BAILLIF
0590 803 305 / 0690 905 439
