Accessoires voor mobiele repeater

Als u al de trotse eigenaar bent mobiele repeater maar toch extra onderdelen of accessoires nodig heeft, vindt u op deze pagina alle informatie die u nodig heeft. Door extra accessoires te bestellen, kunt u alle apparatuur upgraden en aanpassen aan uw behoeften. Als u niet zeker weet welk accessoire u moet kiezen, neem dan contact met onze klantenservice medewerkers op  voor meer informatie over accessoires voor repeaters.

MyAmplifiers biedt op aanvraag de volgende accessoires aan:

• Antennes - Als uw versterker het GSM/4G/3G-signaal niet binnen het vereiste gebied kan versterken, heeft u mogelijk krachtigere antennes nodig die geschikt zijn voor een betere signaalversterking. De meegeleverde antennes kunnen worden gebruikt met repeaters Nikrans en Anytone mobiele signalen.
• Distributieversterkers - Als u het signaal in meer dan één ruimte wilt versterken, dan zijn deze accessoires iets voor u. Distributieversterkers zijn in staat om het signaal efficiënt te distribueren, waardoor ze overal in de kamer een volledige dekking bieden. Ze zijn compatibel met alle Nikrans- en AnyTone-repeaters.
• Kabels - Als u de benodigde versterkeraccessoires heeft gekocht, heeft u mogelijk extra kabels nodig om deze correct te installeren. Een van deze kabels kan ook handig zijn als uw oppervlak langere kabels nodig heeft om het signaal te versterken dan de meegeleverde kabels. Als u nodig hebt aangepaste lengte kabel neem dan contact  met onze klantenservice medewerkers op.
• Bescherming tegen bliksem - Meestal bevindt de externe antenne van de versterker zich hoog op het dak van het gebouw, waardoor het een mogelijk doelwit is voor blikseminslagen. Het wordt aanbevolen om bliksembeveiliging te gebruiken om schade aan de componenten van de signaalversterker te voorkomen.

Opmerking: Kabels die de geleverde lengte overschrijden, kunnen de versterkingscapaciteit van de repeater nadelig beïnvloeden.

Sprietantennes

Sprietantenne NS-WA-3D

In order to effectively boost the signal inside a large location, you are likely to need extra indoor antenna. Designed for indoor application, The antenna features omnidirectional design, has 3dBi gain and distributes GSM, 4G and 3G signal within 698-960Mhz and 1710-2690Mhz frequency bands. The Ingress Protection Code is IP55. The antenna is offered with different connectors, SMA or N type. When placing an order please add the connector type in the comments. The antenna is normally used without cable.

$40

Plafond antenne NS-CA-3D

The best solution to increasing the range of signal boosting is the extra antenna. It is an omnidirectional indoor antenna for ceiling mounting. It works in a frequency range of 698-960Mhz and 1710-2690Mhz, and is compatible with every GSM/ 4G/ 3G mobile repeater from Nikrans. The antenna gain equals 3dBi. The Ingress Protection Code is IP55.  A 5m cable is included.

$60

Paneelantenne NS-IPA-8D

Amplification of the low mobile signal can be easily performed with the help of the indoor panel antenna 8dbi. The Ingress Protection Code is IP55. This antenna works in a frequency range of within 698-960Mhz and 1710-2690Mhz bands. That allows to transmit all GSM/4G and 3G signals. It has directional design and is supposed to be mounted on the wall. Suits for all Nikrans repeaters.  Cable is included.

$80

Flat Indoor Ceiling Antenna NS-FA-3D

The indoor antenna NS-FA-3D is a flat omnidirectional antenna for ceiling mounting. The compact, flat shape is its main advantage, making the antenna easy to install and use in small rooms. The simplicity of installation is also facilitated by the NS-FA-3D light weight of 300 g. The antenna works in a frequency range of 698MHz - 4000MHz, and is compatible with every 5G/4G/GSM/3G mobile signal booster from Nikrans. The gain equals 3dBi, the impedance is 50 Ohm. The package includes a 5m cable.

$60

Buitenantennes

Outdoor Wide Band Yagi NS-LPDA-12D

It is a high-performance antenna intended for working with cellular networks. It is designed to be mounted on the wall and can ensure gains of up to 12 dBi. Works with 698~2700MHz. The Ingress Protection Code is IP55. A cable, as well as necessary mountings, is provided together with the antenna.

$120

Omni-Directional Boat Antenna NS-Boat-12D

This sensitive outdoor antenna for boats is able to catch even the lowest cell signal that can’t be found by your mobile devices. It is waterproof and lightweight and can be installed with any mobile phone signal booster for boats offered in our online catalogue. The antenna is sold together with a cable. The gain level is 12dBi. The Ingress Protection Code is IP55.

$120

Buitenantennes Yagi NS-BY-9D

Designed specifically for outdoor use, the directional outdoor antenna is a professional solution to the low signal issue. It can work at GSM, 4G and 3G frequencies effectively boosting signals within 698-960 MHz and 1710-2690 MHz bands. The gain level of Yagi antenna is 9.5dBi. The Ingress Protection Code is IP55. Suits for all Nikrans booster models. A 10m cable is included.

$90

Paneelantenne NS-OPA-8D

The outdoor panel antenna is one of the most powerful and effective antennas for amplification of the low mobile signal. Its gain equals 8dbi. The Ingress Protection Code is IP55. The uniqueness of this antenna consists in its Dual-Band mode that allows amplifying the signal both within 698-960 MHz and 1710-2690 MHz bands. This antenna has directional design. Suits for all Nikrans cell phone repeaters. A​ 10m​ cable is included.

$90

Connectoren en adapters

Connector adapters N-male to SMA-male

These connector adapters N-male to SMA-male ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10

Connector adapter N-female to N-female

These connector adapters ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10

Connector adapter N-female to SMA-male

These connector adapters N-female to SMA-male ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10

Connector adapter N-male to N-male

These connector adapters N-male to N-male ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10

Connector adapter N-male to SMA-female

These connector adapters N-male to SMA-female ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10

Connector for 3D-FB cable

You can buy a reliable connector that will help to prevent signal power losses ensuring excellent results of your booster’s work. The connectors offered in our catalogue are universal and can be used for joining elements of a wide range of different mobile phone signal booster models available on the market. The Ingress Protection Code is IP55.

$10

Connector for 5D

A reliable connector that will help to prevent signal power losses ensuring excellent results of your booster’s work. Universal and can be used for joining elements of a wide range of different mobile phone signal booster models available on the market. The Ingress Protection Code is IP55.

$10

Connector for 7D

You can buy a reliable connector that will help to prevent signal power losses ensuring excellent results of your booster’s work. The connectors offered in our catalogue are universal and can be used for joining elements of a wide range of different mobile phone signal booster models available on the market. The Ingress Protection Code is IP55.

$10

Coaxiale kabels

Cable for GSM, 5G, 4G and 3G COAX-3D-FB-5M

It is a reliable coaxial cable that can be used with any of the GSM, 4G and/or 3G, 5G mobile signal boosters that are available on our website. We offer these cables of different lengths which makes it possible to choose the most appropriate variant. Please do not use too long cables for a booster as it can be a reason for lost signal power. The Ingress Protection Code is IP55.

$30

10m Cable for GSM, 5G, 4G and 3G COAX-3D-FB-10M

It is a reliable 10 m coaxial cable that can be used with any 5G, 4G, GSM and 3G mobile signal booster featured on our website. The Ingress Protection Code of the cable is IP55. The cable impedance is 50 ohm. Please do not use too long cables for a booster, as this may lead to loss of signal strength. To increase efficiency, it is recommended to use long cables only with advanced high-power amplifiers, and not with basic ones.

$40

15m Cable for 5G, GSM, 4G and 3G COAX-3D-FB-15M

This reliable 15m coaxial cable is compatible with all our 5G, 4G, GSM, or 3G mobile signal boosters. The cable has an Ingress Protection Code of IP55. The cable's impedance measures 50 ohm. Avoid using too long cables for a booster, as this could cause a loss of signal strength. Long cables are only recommended for advanced high-power boosters, not basic ones, to increase efficiency.

$60

20m Cable for 5G, 4G ,GSM and 3G COAX-3D-FB-20M

The use of this reliable coaxial cable having IP55 Ingress Protection Code is acceptable for all our 5G, 4G, GSM, or 3G mobile signal boosters. The cable length is 20m. The cable's impedance has a measurement of 50 ohm. To maintain signal strength, avoid using overly long cables for a booster. In order to improve performance, make use of long cables with advanced high-power boosters, not basic models.

$65

5m kabel voor GSM, 4G en 3G COAX-5D-FB-5M

This universal and high-quality coaxial cable has 5 meters of length. It suits for mounting amplifiers that work at 900MHz (GSM), 1800 MHz (DCS), 1900 MHz (PCS), 2100 MHz (3G), 4G LTE, 5G. The cable features 73 kg of tensile strength and 50 ohm of characteristic impedance. The Ingress Protection Code is IP55.

$30

10m kabel voor GSM, 4G en 3G COAX-5D-FB-10M

This universal and high-quality coaxial cable has 10 meters of length. It suits for mounting amplifiers that work at 900MHz (GSM), 1800 MHz (DCS), 1900 MHz (PCS), 2100 MHz (3G), 4G LTE, 5G and with all Single, Dual Bands, TriBands or Multi Bands. The cable features 73 kg of tensile strength and 50 ohm of characteristic impedance. The Ingress Protection Code is IP55.

$40

15 m kabel voor GSM, 4G en 3G COAX-5D-FB-15M

Suitable both for indoor and outdoor application, this coaxial cable can be used with any booster at Myamplifier that work at standard frequency bands - GSM, 4G LTE, 3G, 5G. This cable has a 15-meter length and features excellent shielding effectiveness and insulation resistance. The Ingress Protection Code is IP55.

$60

20m kabel voor GSM, 4G en 3G COAX-5D-FB-20M

This cable is a physical foam coaxial cable that is mainly used for radio communication, broadcasting, network, etc. Its impedance is 50ohm. The Ingress Protection Code is IP55. And it is compatible with all our amplifiers that work at GSM, 4G/ 3G / 5G or several frequency bands. . It's recommended to use long cables only with advanced powerful boosters, not with the basic ones for better efficiency. 20m​ is also mostly used for outdoor application.

$65

Cable for GSM, 5G, 4G and 3G COAX-7D-FB-10M

This high-quality coaxial cable is a universal variant for different devices, including our mobile phone signal boosters for calls and mobile internet that work with GSM, 4G LTE and/or 3G, 5G networks. It is very important to use cables of an appropriate length to avoid the deterioration of the quality of the improved signal. On our website, you can order these cables of different lengths. The Ingress Protection Code is IP55.

$80

40m Cable for GSM, 5G, 4G and 3G COAX-7D-FB-40M

This 40m physical foam coaxial cable has its primary uses in radio communication, broadcasting, networking, among other applications. All of our boosters that support 5G, 4G, GSM, and 3G are compatible with it. The cable has an impedance of 50 ohm. The Ingress Protection Code is IP55. To improve efficiency, it is recommended to use long cables only with advanced powerful boosters, not with the basic ones.

$155

50m Cable for 5G, GSM, 4G and 3G COAX-7D-FB-50M

The cable is a physical foam coaxial cable that is largely utilized in radio communications, broadcasting, networking, and other applications. The cable length is 50m. This product can be used with any of our mobile signal boosters, which function on 5G, 4G, GSM, and 3G networks. It has a 50 ohm impedance. The Ingress Protection Code is IP55. To improve performance, it is suggested to use long cables only with advanced high-power boosters, and not with basic ones.

$185

60m Cable for 5G, 4G, GSM, and 3G COAX-7D-FB-60M

This 60m physical foam coaxial cable has the primary use in telephony, broadcasting, networking, and other applications. Using this product is possible with any of our mobile signal boosters, which work on 5G, 4G, GSM, and 3G networks. The cable impedance corresponds to 50 ohm. The Ingress Protection Code is equivalent to IP55. Long cables should only be used with advanced high-power repeaters for performance improvement, but not with basic models.

$210

100m Cable for 5G, 4G, GSM, and 3G COAX-7D-FB-100M

This 100m physical foam coaxial cable is predominantly used to conduct telephone calls, transmit video and data, and is also useful with our mobile signal boosters, which operate on 5G, 4G, GSM, and 3G networks. The cable's impedance is 50 ohm and the Ingress Protection Code is the same as IP55. To maximize performance, choose long cables only with modern, powerful amplifiers, not basic models.

$390

Bescherming tegen bliksem

Overspanningsbeveiliging NS-LSP

A lightning surge protector is a device designed to prevent the signal booster system from being damaged in the case if lightning strikes the outside antenna. If you live in a region prone to thunderstorms that will be a good idea to use a lightning protector between the outside antenna and the booster in order to protect it from a breakdown. A grounding wire is shipped with the device. The Ingress Protection Code is IP55. Read more on the installation tips of a lightning protector.

$40

Splitters en koppelingen

5/6dB cavity coupler NS-CP-6D

This is 5/6dB cavity coupler for 698~2700MHz, N Female. This waterproof coupler with a coupling value of up to 6 dB helps to avoid mobile signal power losses in the process of signal transmission within a series of antennas. It is recommended to install this booster set accessory indoors. This coupler can be used with any other accessories as well as all GSM, 4G, 3G signal boosters that you can see on our website. The Ingress Protection Code is IP55.

$65

7/8dB cavity coupler NS-CP-8D

This 7/8dB cavity coupler is for 698~2700MHz, N Female. This coupler is recommended to be used for installing GSM, 4G LTE, 3G mobile phone signal repeaters with a series of antennas. This element will help to avoid any power losses that can negatively influence the quality of the signal while it is being transmitted from one antenna to another. The coupling value is 7/8 dB. The Ingress Protection Code is IP55. The accessory is waterproof and is compatible with all the boosters that we offer.

$75

10/15/20dB cavity coupler NS-CP-15D

A 10/15/20dB cavity coupler for 698~2700MHz, N Female, is suitable for being installed with any kind of mobile phone signal boosters, including repeaters intended for GSM, 4G LTE and 3g cellular networks. The accessory has a coupling value of up to 20 dB. It will help to minimize the risks of losing the signal power while the signal is being sent from one antenna to another within a series of antennas. The Ingress Protection Code is IP55.

$80

Tweeweg distributieversterkers NS-WS-2W

A two-way splitter is an irreplaceable accessory for you if your mobile repeater is meant for two or more rooms. It can operate at the frequency range of 698-960MHz and 1710-2690MHz providing all the house, office building or store with an improved signal. The Ingress Protection Code is IP55. 2m cable is included. Compatible with all Nikrans mobile repeaters.

$50

Drieweg distributieversterkers NS-WS-3W

So that to take maximum advantage of your powerful mobile repeater, you will need a splitter that distributes the improved signal to three or more different rooms. This option is widely used in stores, office buildings and private houses. This three-way splitter works in 698-960MHz and 1710-2690MHz frequency bands. The Ingress Protection Code is IP55. The splitter is delivered with 2 m cable.

$60

Vierweg distributieversterkers NS-WS-4W

The most effective splitter for a large location is a four-way splitter that permits distributing the signal to four different directions simultaneously. The supported frequency range is from 698-960MHz and 1710-2690MHz. The Ingress Protection Code is IP55. The kit contains 2 m cable. All cell phone repeaters from Nikrans can be used with this splitter.

$65

Power Supply NS-PS-5V2A

The NS-PS-5V2A power supply is a compact and efficient solution for powering your appliances from standard household outlets. It is compatible with a range of electronic devices including the 5G, 4G, GSM and 3G signal boosters featured on our website. Its lightweight and durable design makes it ideal for use in the home, office or other environments.

$30

Power Supply NS-PS-5V3A

The NS-PS-5V3A power supply can be used to provide energy for your appliances from standard household outlets. It is compatible with various electronic devices like the 5G, 4G, GSM, and 3G signal boosters we have on our website. Due to its lightweight and durable design, it is ideal for use in homes, offices, or other environments.

$30

Power Supply NS-PS-12V5A

By plugging into standard household outlets, the NS-PS-12V5A power supply provides a source of energy for your devices. It can be used with various electronic appliances, among others the 5G, 4G, GSM, and 3G signal boosters that are listed on our website. A design that is both lightweight and durable makes the NS-PS-12V5A a great option for use in homes, offices, or other locations.

$35

Power Supply NS-PS-24V5A

The NS-PS-24V5A power supply is a source of energy for your appliances when connected to standard household outlets. It is also suitable for using electronics such as the 5G, 4G, GSM, and 3G signal boosters listed on our website. The NS-PS-24V5A offers the advantages of being both lightweight and durable, which makes it a great choice for use at homes, institutions, offices, or other places.

$40

5V2A vehicle power supply NS-PS-5V

This 5V2A vehicle power supply is a lightweight and compact power supply that can be installed in vehicles of different types and sizes. It should be plugged directly into vehicle cigarette lighter and is compatible with the majority of modern devices designed for drivers including all GSM, 4G and 3G mobile phone signal boosters available on our website. The Ingress Protection Code is IP55.

$30

24V/5V or 12V/5V power adapter NS-PS-12V

This 24V/5V or 12V/5V on your choice high-quality power adapter should be plugged into a wall outlet in order to convert 12V or 24V power from the outlet to 5V power needed for the safe and correct functioning of your booster. The power adapter can be compatible with all the cell phone signal repeaters available in the MyAmplifiers online catalogue. The Ingress Protection Code is IP55.

$35